945T-L – (trailed, 4.5t nominal capacity)
960T-L – (trailed, 6t nominal capacity)
910T – (trailed, 10t nominal capacity)
912T – (trailed, 12t nominal capacity)
914T – (Single axle trailed, 14t nominal capacity)
The versatile Marshall Spreader will spread a wide range of materials such as lime, gypsum, manures, granulated fertilisers and seeds.
These machines come fitted with twin 700mm hydraulic driven spinners and 875mm wide endless PVC feed belt.
This allows the machine to handle application rates from 20kg/hectare for seed and granulated fertilisers through to 8000kg/ha for lime, gypsum and manure with spread widths of pass varying from 14 metres and up to 36 metres.
With the Marshall Multispread’s ground drive feed belt system you can vary your operating speed to suit the paddock condition and not alter your desired rate per hectare.
The 900 series feedbelt system uses an 875mm wide endless belt. This premium-grade PVC belt is three to four times stronger than a standard two-ply rubber belt. Driven by a rubber-coated roller and supported by stainless steel rollers with stainless steel shafts running on nylon bushes, this system ensures a low friction and low maintenance drive.
The standard spinner drive is hydraulic with optional engine drive available. To help protect against corrosion the hopper and chassis are grit blasted before the primer and two-part top-coat is electro statically applied.
The 914T can be supplied with two axle variants. Single axle, or tandem walking beam suspension. (Features listed below reflect single axle variant)
|All Models||945T-L, 960T-L, 910T, 912T, 914T|
|Feedbelt type||PVC belt/roller|
|Ground drive||Rubber wheel/hyd cyl|
|Spinner type||Twin D2|
|Spinner drive options||25hp engine|
|Spread Widths||945T-L, 960T-L||910T, 912T, 914T|
|Granulated||up to32||up to36||metres|
|Standard||500/60 x 22.5||550/60 x 22.5||23.1 x 26 x 16ply||23.1 x 26 x 16ply||750/65R26|
|Alternative tyre options available for these models|