800 Series Marshall Spreaders – Trailed – 2.5T
825T – (trailed, 2.5t nominal capacity) This versatile Marshall Spreader will spread a wide range of materials such as lime, gypsum, manures, granulated fertilisers and seeds. The 825T and it’s vineyard cousin, 825HS, are fitted with twin 600mm diameter spinners. They both have a 800mm wide feedbelt system. This allows the machine to handle application rates from 20kg/hectare for seed and granulated fertilisers through to 8000kg/ha for lime, gypsum and manure with spread widths of pass varying from 10 metres and up to 30 metres. With the Marshall Multispread’s ground drive feedbelt system you can vary your operating speed to suit the paddock condition and not alter your desired rate per hectare. The feedbelt is attached to a high-grade chain assembly supported by wear-resistant nylon skids. The standard spinner drive is from the tractor PTO with optional hydraulic or engine drives available. To help protect against corrosion the hopper and chassis are grit blasted before the primer and two-part top-coat is electrostatically applied.